Hypervm Xen Windows VPS Network not showing 1Gbps

If you're running HyperVM Xen VPS and your Windows vm somehow not showing 1Gbps port, only 100Mbps port, when the main node actually connects to 1Gbps port, you can try download and install these drivers from http://www.meadowcourt.org/downloads/ - select your proper windows version. You can also find it in our Downloads section.

Kas see vastus oli kasulik?

 Prindi artikkel

Loe veel

How to reboot a unix server via telnet?

Using a telnet program like http://www.telnet98.com/ or SSH Client like putty (for windows),...

How to install Windows VPS under Hypervm

After you follow this http://wiki.lxcenter.org/HyperVM-Windows and still problems below:1....

Why my drive is slow

First, check to make sure write cache is enabled. On Centos, you type hdparm -I /dev/sda Then...

How to install lm_sensors on XenServer

This is tested on Xenserver 6, may also work on other similar OS 1. ssh to server as root 2....

My raid-10 speed seems slow when test using hdparm

See http://tldp.org/HOWTO/Software-RAID-HOWTO-9.html To check out speed and performance of your...